ZOLL Aed Plus Administrator's Manual page 42

Defibrilator
Hide thumbs Also See for Aed Plus:
Table of Contents

Advertisement

Recommended separation distances between portable and mobile RF communications
equipment and the ZOLL AED Plus
The ZOLL AED Plus is intended for use in an environment in which radiated RF disturbances are controlled. The
customer or the user of the ZOLL AED Plus can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the ZOLL
AED Plus as recommended below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be determined using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 The ISM (industrial, scientific and medical) bands between 150 kHz and 80 MHz are 6.765
MHz to 6.795 MHz; 13.553 MHz to 13.567 MHz; 26.957 MHz to 27.283 MHz; and 40.66 MHz to
40.70 MHz.
NOTE 3 An additional factor of 10/3 is used in calculating the recommended separation distance for
transmitters in the ISM frequency bands between 150 kHz and 80 MHz and in the frequency range
80 MHz to 2.5 GHz to decrease the likelihood that mobile/portable communications equipment
could cause interference if it is inadvertently brought into patient areas.
NOTE 4 These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
32
Separation distance according to frequency of transmitter
150 kHz to 80
150 kHz to 80
MHz outside
MHz in ISM
ISM bands
bands
3.5
d =
√P
d =
[
]
3
0.17
0.37
1.17
3.69
11.70
12.00
ZOLL AED PLUS Administrator's Guide
m
80 MHz to 800
MHz
12
12
d =
]
√P
[
[
10
10
0.12
0.12
0.38
0.38
1.20
1.20
3.79
3.79
12.00
800MHz to 2.5
GHz
23
d =
√P
√P
]
[
]
10
0.23
0.73
2.3
7.27
23.00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents