ZOLL Aed Plus Administrator's Manual page 29

1. Ensure that the unit is turned off. Open the battery compartment by removing the battery cover
from the back of the unit.
To remove the battery cover, insert a small tool (e.g., flat blade screw driver) into the two slots on
the rear of the unit to depress the latches, then insert the tool into the groove on the bottom to lift
the cover (see Figure 7).
Battery
Compartment
Door
1) Depress latch
here
Figure 7: Removing the Battery Compartment Door
2. Remove all batteries at once and dispose of batteries properly. Place new batteries into the battery
bank, observing battery polarity markings and making sure that all batteries are securely seated
and properly oriented. After placing the first 5 to 9 batteries in the battery well, the
INSTALL BATTERIES audio prompt reminds you to install the remaining batteries in the battery
compartment.
Figure 8: Battery Compartment
ZOLL AED PLUS Administrator's Guide
Battery Reset Button
2) Lift cover here
19