ZOLL Aed Plus Administrator's Manual page 14

Table 1: Control Function
Control/Indicator
ON/OFF Button
Indicator lights
Shock Button
Pictograms
Status Indicator
LCD Display
™
IrDA Port
PASS Cover
(optional)
Battery
Compartment
Patient Connector
Speaker
Microphone
(optional)
4
Description
Turns power ON or OFF.
When held depressed for > 5 seconds initiates self test or data
communications.
Illuminates to indicate which step rescuer must take to treat a patient.
Illuminates when the ZOLL AED Plus is charged and ready to deliver a
shock to the patient.
When pressed, causes the charged and ready ZOLL AED Plus to discharge its
energy into the patient.
When the ZOLL AED Plus is not charged the lighted button is extinguished.
Pressing this button initiates a voice prompt that indicates the number of
defibrillator shocks delivered since the unit was powered on.
Icons that explain the series of steps needed for resuscitation and
defibrillation.
Illuminated check mark indicates the unit passed its last self test and is ready
for use.
Illuminated "X" indicates unit has failed its self test and is not ready for use
Displays elapsed time, shock count, user prompts, CPR compression depths
and ECG waveforms.
Provides a communications link between the defibrillator and a personal
computer or another IrDA
Some ZOLL AED Plus models include a cover that may be used as a
shoulder support to aid patient airway management. The PASS can be
ordered separately for other ZOLL AED Plus models (see "Ordering
Accessories" on page 26).
Holds ten (10) 123A lithium manganese dioxide batteries used to power the
unit.
Connector for attaching electrodes to the ZOLL AED Plus.
Provides audio prompts and metronome beeps that direct rescuers on what to
do during a resuscitation; also provides voice prompts to indicate if service is
required.
When voice recording option is installed, this microphone picks up and
records ambient sounds, including rescuer's voice.
ZOLL AED PLUS Administrator's Guide
™
equipped device.