Specifications - Icom IC-T3H Instruction Manuals

D D
General
• Frequency range
• Operating temp. range
• Frequency stability
• Antenna connector
• Power supply requirement
• Current drain (at 7.2 V DC)
Transmit at 5.5 W
at 0.5 W
Receive at max. AF
Stand-by
Power save
• No. of memory channels
• Tuning steps
• Dimensions (proj. not incl.)
• Weight (approx.)
D D Transmitter
• Modulation system
• Output power (at 7.2 V DC)
• Max. frequency deviation
• Spurious emissions
• External mic. connector
D D Receiver
• Receiving system
• Intermediate frequencies
• Sensitivity (at 12 dB SINAD)
• Squelch sensitivity
• Selectivity
• Intermodulation rejection
• Spurious & image rejection
• Audio output power
(at 7.2 V DC)
• External speaker connector

SPECIFICATIONS

: 144–146 MHz (Tx/Rx)
: –10˚C to +60˚C
: ±10 ppm (–10˚C to +60˚C)
: BNC (50 Ω)
: 7.2 V DC (6–10.3 V DC acceptable; Icom's bat-
tery pack only)
:
Less than 2.0 A
Less than 0.7 A
Less than 250 mA
Less than 70 mA
Less than 20 mA
: 107 (incl. 1 call and 6 programmed scan edges)
: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
: 54(W)×132(H)×35(D) mm
: 350 g (with BP-222)
190 g (without battery pack)
: Variable reactance frequency modulation
: 5.5 W (High), 0.5 W (Low)
: ±5.0 kHz
: Less than –60 dB
: 3-conductor 2.5 (d) mm; 2.2 kΩ
: Double conversion superheterodyne system
: 1st: 21.7 MHz, 2nd: 450 kHz
: 0.16 µV typ.
: 0.1 µV typ.
: 65 dB typ.
: 65 dB typ.
: 75 dB typ.
: More than 0.3 W at 10% distortion with an
8 Ω load
: 2-conductor 3.5 (d) mm; 8 Ω
14
56