Engine Removal 21 Inch Models - Toro Power Clear 621 Service Manual

ENGINE MOUNTING

Engine Removal 21 Inch Models

1. Remove the shroud as outlined in chapter 3.
2. Empty the fuel from the fuel tank into a suitable
container. Remove the fuel hose and remove the
fuel tank.
3. Remove the screw from the underside of the choke
knob and remove the choke knob (Fig. 010).
4. Untie the knot on the recoil handle (Fig. 011).
5-6
5. Route the recoil rope through the lower shroud and
knot the rope (Fig. 012).
6. Disconnect the primer hose from the primer bulb and
remove the ignition wires from the ignition switch.
(Fig. 013).
Fig. 010
Fig. 011
Toro Single Stage Snow Service Manual
Fig. 012
Fig. 013