Toro Power Clear 621 QZR Operator's Manual

Power Clear
Model No. 38458-Serial No. 313000001 and Up
Model No. 38459-Serial No. 313000001 and Up

Introduction

This machine is intended to be used by residential
homeowners. It is designed for removing snow from
paved surfaces, such as driveways and sidewalks, and
other surfaces for traffic on residential or commercial
properties. It is not designed for removing materials
other than snow, nor is it designed for clearing off gravel
surfaces.
Read this information carefully to learn how to operate and
maintain your machine properly and to avoid injury and
machine damage. You are responsible for operating the
machine properly and safely.
You may contact Toro directly at www.Toro.com for machine
and accessory information, help finding a dealer, or to register
your machine.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your machine ready. Figure 1 identifies the location of the
model and serial numbers on the machine. Write the numbers
in the space provided.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
© 2012-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® 621 QZR/QZE Snowthrower
Figure 1
Register at www.Toro.com.
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Introduction .................................................................. 1
Training ................................................................. 2
Preparation............................................................. 2
Operation............................................................... 2
Clearing a Clogged Discharge Chute .......................... 3
Maintenance and Storage.......................................... 3
Toro Snowthrower Safety ......................................... 3
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 5
1 Unfolding the Handle............................................ 5
2 Installing the Discharge Chute ................................ 5
3 Filling the Engine with Oil...................................... 6
4 Adjusting the Control Cable ................................... 6
Product Overview .......................................................... 7
Operation ..................................................................... 8
Filling the Fuel Tank ................................................ 8
Checking the Engine Oil Level .................................. 8
Starting the Engine .................................................. 9
Engaging the Rotor Blades.......................................11
Disengaging the Rotor Blades ..................................11
Stopping the Engine ...............................................11
Adjusting the Discharge Chute and Chute
Deflector ...........................................................11
Clearing a Clogged Discharge Chute .........................12
Preventing Freeze-up after Use.................................12
Operating Tips ......................................................13
Maintenance .................................................................14
Recommended Maintenance Schedule(s) ......................14
Adjusting the Control Cable.....................................14
Inspecting the Rotor Blades .....................................15
Original Instructions (EN) All Rights Reserved *3373-706* A
Printed in the USA
Form No. 3373-706 Rev A
Operator's Manual
Figure 2