4. Hold the discharge chute in the straightahead
position, pull the lower cable casing downward until
you remove the slack in the cable, and tighten the
screw on the lower cable clamp securely (Fig. 027).
A
A. Lower cable casing
5. Pull the upper cable casing forward until you remove
the slack in the cable, and tighten the screw on the
upper cable clamp securely (Fig. 028).
A
A. Upper cable casing
NOTE
Do not overtension the cables. If the cables are
overtensioned, the Quick Shoot will be hard to operate.
Toro Single Stage Snow Service Manual
SPECIFICATIONS & MAINTENANCE
Fig. 027
Fig. 028
2-23