Toro Power Clear 621 Service Manual page 47

9. Insert the barrel of the grey cable into its slot in the
gear. Secure the cable under the tabs in the gear
(Fig. 029).
10. Route the cable around the top of the spool (Fig. 030).
11. When the cables are routed correctly the cables and
gear should look like this (Fig. 031).
Toro Single Stage Snow Service Manual
12. Slide the gear into the pinion bracket and secure the
cable locks (Fig. 032).
Fig. 029
13. Align the quick chute control and the discharge chute
as outlined in the specifications and maintenance
chapter. Insert the pinion spacer sleeve and insert
the pinion and bracket assembly as shown. Tighten
bolt to 8 ft-lbs (11 Nm) (Fig. 033).
Fig. 030
NOTE
Do not overtighten!
Fig. 031
CHASSIS
Fig. 032
Fig. 033
3-19