Engine Installation 18 Inch Models - Toro Power Clear 621 Service Manual

Engine Installation 18 Inch Models

1. Insert the engine into the chassis. Install the four
engine mounting bolts that connect the engine to the
side plate (A). Torque to 14-18 ft-lbs (19-25 Nm)
(Fig. 007).
2. From the underside of the chassis, install the two
engine mounting bolts (A). Torque to 14-18 ft-lbs
(19-25 Nm) (Fig. 008).
Toro Single Stage Snow Service Manual
Fig. 007
A A
Fig. 008
ENGINE MOUNTING
3. Install the engine pulley. Torque bolt to 19 ft-lbs
(26 Nm) (Fig. 009).
4. Install the belt as outlined in chapter 2. Install belt
cover. Install shroud as outlined in chapter 2.
Fig. 009
5-5