Toro Power Clear 621 Service Manual page 67

7. From the underside of the chassis, remove the two
engine mounting bolts (A) (Fig. 014).
A
8. Remove the belt cover and belt as outlined in
chapter 2 (Fig. 015).
9. Remove the engine pulley.
10. On some models, the engine pulley has two set
screws. One is an allen head set screw and the
other is a bolt. Be sure to loosen both set screws
before attempting removal (Fig. 016).
Toro Single Stage Snow Service Manual
A
Fig. 014
Fig. 015
Fig. 016
ENGINE MOUNTING
11. Remove the four engine mounting bolts that secure
the engine to the engine plate (A) (Fig. 017).
A
A
12. Remove the engine from the chassis (Fig. 018).
A
A
Fig. 017
Fig. 018
5-7