5. Pull the side plate out slightly to gain clearance to
get the rotor out (Fig. 009).
6. Lift rotor assembly out of the housing (Fig. 010).
7. Replace rotor parts as required (Fig. 011).
Toro Single Stage Snow Service Manual
POWER PROPEL SYSTEM
8. Slide rotor back into the housing. Reinstall the bolts
and torque to 8 ft-lbs (11 Nm) (Fig. 012).
Fig. 009
9. Re-install the rotor pulley and drive belt. Torque rotor
pulley bolt to 8 ft-lbs (11 Nm) (Fig. 013).
A
Fig. 010
10. Re-install the belt cover. Torque bolts to 8 ft-lbs
(11 Nm).
Fig. 011
Fig. 012
Fig. 013
4-7