System Connections; Connecting To The Power Supply; Connecting To An External Av Signal Source (Av2/S-Video) - Teac LCDV2655HD User Manual

System Connections

•
Open the back cover on the right side of the unit's rear panel.
•
Do not connect the power cord until all other connections have been made.
•
Ensure that you observe the color code when connecting audio and video cables.

Connecting to the Power Supply

Connect the power supply cord to the wall AC outlet, see the figure below.

Connecting to an External AV Signal Source (AV2/S-Video)

Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel
of the unit. Use a S-VIDEO cable (not supplied) to connect the external AV signal source to the
S-VIDEO input jack on the rear panel of the unit.
After connection, turn on the power of the unit and the external AV signal source. Press INPUT then
direction buttons to select Composite 2 or S-Video mode, and then press the ENTER button to
confirm.
The L/R audio input jacks can be used in both Composite 2 and S-VIDEO modes.
- - 12