Assembly; Blow Pipe - Husqvarna 525BX Operator's Manual

H1156688-38,525BX,GB_1.fm Page 11 Tuesday, April 19, 2016 10:37 AM

Blow pipe

The blower tube has a pegged slot mounting system to
the unit.
• To install or remove the blower tube, the tube clamp
screw must be loosen.
• Align slot in the blower air outlet with the raised rib on
the intermediate tube and insert tube until the holes in
the tube and housing align.
• Re-tighten the tube clamp bolt.
2
3
4
1 Tube clamp screw
2 Intermediate tube
3 Round nozzle
4 High speed nozzle

ASSEMBLY

1
–
English 11