Assembly - Husqvarna 340iBT Operator's Manual

• Remove the battery before
you do maintenance, other
checks or assemble the
product.
• The operator must only do the
maintenance and servicing
shown in this operator's
manual. Speak to your
servicing dealer for
maintenance and servicing of
a larger extension.
• Keep all nuts, bolts and
screws tight to be sure the
product is in safe working
condition.
• Replace worn or damaged
parts.
Introduction
WARNING: Read and understand the safety
chapter before you assemble the product.
To assemble the tube and handle on
the product
1. Put the clamp (B) on the flexible tube (C) and attach
the flexible tube to the blower outlet (A).
B
A
2. Make sure to put the clamp screw (D) as the
illustration shows. Tighten the screw.
1166 - 002 - 29.10.2019

Assembly

C
D
• If you do not do maintenance,
it decreases the life cycle of
the product and increases the
risk of accidents.
• Special training is necessary
for all servicing and repair
work, especially for the safety
devices on the product. If not
all checks in this operator's
manual are approved after
maintenance, speak to your
servicing dealer. We
guarantee that there are
professional repairs and
servicing available for your
product.
• Only use original spare parts.
3. Attach the transport strap (O) to the guide track of
the joint swivel (H).
O
4. Put the clamp (B) on the flexible tube (C) and attach
the joint swivel (H).
B
C
5. Make sure to put the clamp screw (D) as the
illustration shows. Tighten the screw.
H
H
D
13