Assembly - Husqvarna 230iB Operator's Manual

environment which has a good airflow, dry
and free from dust.
• Do not put objects into the cooling slots of the
battery charger.
• Do not connect the battery charger terminals
to metal objects as this can short circuit the
battery charger.
• Use approved wall sockets that are not
damaged.
• Regularly examine that the power cord is not
damaged. Immediately disconnect the battery
charger if the power cord is damaged.
• If the power cord is damaged replace the
power cord.
• Keep the battery charger away from children.
• Do not use a battery charger that is damaged
or does not operate correctly.
• Do not use the battery charger when there is
a risk of lightning.
• Do not operate the battery charger with wet
hands.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Maintenance and storage
• Keep all nuts, bolts and screws tight to
be sure the appliance is in safe working
condition.
Introduction
This section describes how to assemble and
adjust the product.
WARNING:
the product, read the safety chapter
and the assembly instructions.
14

Assembly

Before you assemble
• Replace worn or damaged parts.
• Use only genuine replacement parts and
accessories.
• Store the appliance only in a dry place.
Safety instructions for maintenance
WARNING:
warning instructions that follow before
you do maintenance on the product.
• Remove the battery before you do
maintenance, other checks or assemble the
product.
• The operator must only do the maintenance
and servicing shown in this operator's
manual. Speak to your servicing dealer
for maintenance and servicing of a larger
extension.
• Keep all nuts, bolts and screws tight to be
sure the product is in safe working condition.
• Replace worn or damaged parts.
• If you do not do maintenance, it decreases the
life cycle of the product and increases the risk
of accidents.
• Special training is necessary for all servicing
and repair work, especially for the safety
devices on the product. If not all checks
in this operator's manual are approved after
maintenance, speak to your servicing dealer.
We guarantee that there are professional
repairs and servicing available for your
product.
• Only use original spare parts.
To assemble the blower tubes
Note:
Apply water-based lubricant on the end of
the tubes to make assembly easier.
• Attach the blower nozzle to the tube until the
tab (B) goes into the hole (A). Make sure that
the blower nozzle and the tube are locked
together. (Fig. 22)
Read the
1516 - 008 - 29.11.2023