Assembly - Husqvarna Aspire B8X-P4A Operator's Manual

plug should have the same fuse rating as the original
plug. The severed plug must be disposed of to
avoid a possible shock hazard and should never be
inserted into a mains socket elsewhere.
WARNING:
product makes an electromagnetic field
while it operates. This field may under some
conditions interfere with active or passive
medical implants. To decrease the risk of
conditions that can possibly injure or kill, we
recommend persons with medical implants
to speak with their physician and the medical
implant manufacturer before you operate the
product.
WARNING:
parts can be easily swallowed. There is
also a risk that the polybag can suffocate
toddlers. Keep toddlers away when you
assemble the product.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
• To prevent accidental start during maintenance,
turn the safety key to 0 and remove the battery.
Introduction
WARNING:
safety chapter before you assemble the
product.
To install the nozzle
1. Put the nozzle on the front end of the product. (Fig.
21)
2. Push in the nozzle until you hear a click.
To install the hook on the wall
1. Install the storage hook on the wall with the 3 screws
(A). Use wall plugs (B) if it is necessary. (Fig. 22)
2. Put the product on the storage hook. (Fig. 23)
1876 - 003 - 27.09.2022
Cardiac arrest! This
Risk of suffocation! Small
Read the warning

Assembly

Read and understand the
Wait at minimum 5 seconds before you start the
maintenance.
• Only do the maintenance work written in this
operator's manual. More extensive work and
professional repairs must be done by an approved
service agent. Speak to your nearest service agent
for more information.
• Do the maintenance work correctly to increase the
lifetime of the product and decrease the risk of
accidents.
• Replace damaged, worn or broken parts. Always use
original spare parts from the manufacturer. Other
spare parts can cause damage to the product and
increase the risk of accidents.
• To prevent injury, do not remove or do modifications
to safety devices.
• Put on heavy duty gloves when you use the cutting
equipment. The blade is very sharp and cuts can
easily occur.
• Keep the cutting edges sharp and clean for the best
and safest performance.
• Let your service agent regularly examine the product
and make necessary adjustments and repairs.
• Obey the instructions for how to change accessories.
Only use accessories from the manufacturer.
• When not in operation, keep the product, battery and
battery charger apart in a dry, indoor and locked
area. Make sure that children and persons that are
not approved cannot get access to the product,
battery or battery charger.
CAUTION!
• Make sure that you obey the instructions for storage
of your products.
• Make sure that the wall can hold loads of minimum
30 kg.
• The screws that are included with the product can be
used for wall installation of the product. Make sure
that the screws are applicable with your wall type.
• The product is intended to be used in temperatures
of -10°C to 70°C.
• The product can be installed on a drywall, wood,
concrete wall.
• The product is for indoor use only. Keep out of direct
sunlight.
• Be sure to use appropriate safety equipment when
using power and hand tools.
313