Page 3
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION The 1 by 8 UHD HDMI Splitter is an advanced solution for splitting and distributing a single HDMI input to 8 HDMI outputs. It provides high performance audio and video output up to 4K2K@60Hz (YUV420) resolution and is capable of provide high levels of audio and video performance.
5. FEATURES • HDMI 2.0 with 4Kx2K supported, HDCP1.4 and DVI compliant • 1 HDMI input and 8 HDMI outputs • System Reset function supported (CEC active source command) • Simultaneous displays of a single Ultra High-Definition sources on up to 8 UHDTV displays •...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER EDID SYS-RST SERVICE POWER: This LED will illuminate when the device is connected to an active power supply. OUT LED 1~8: When output detected, the LED will illuminate, and when output is not connected, the LED will off. IN: When input detected, the LED will illuminate.
6.2 Rear Panel DC 5V DC 5V: Connect the adapter included in the package and connect to AC wall outlet for power supply. OUTPUT 1~8: Connect to HDMI TV / display or HD amplifier for output display. INPUT: Connect with HDMI source equipment such as Blu-ray/PS4 players and or PC/Laptop devices.
Need help?
Do you have a question about the CPRO-U8T and is the answer not in the manual?
Questions and answers