Polishing Workpieces - Dick SM-100 Operating Instructions Manual

Machining workpieces
8.2

Polishing workpieces

1
Figure 8.3 – Polishing knives
[1] Positioning angle slanted relative to the running direction
(forming an angle of approx. 30° - 60°)
[2] Positioning angle relative to the polishing wheel (approx. 20°)
1 Hold the polishing paste against the polishing wheel while it
is running,
2 Position the knife slanted relative to the running direction,
3 Position the knife at the polishing wheel at a more obtuse
angle than for grinding,
4 Grind the knife until the burr has been completely removed
and the surface has the required polish.
5 Polish both sides of the blade alternately.
Belt grinder SM-100
8
2
29