Machining Workpieces; Grinding Workpieces - Dick SM-140 Operating Instructions Manual

Machining workpieces

8. Machining workpieces
8.1

Grinding workpieces

Grinding zones
1
2
Figure 8.1 – Grinding zones
[1] Grinding on the free belt for convex grinding
[2] Grinding with underlay on the rubber-contact wheel
Dirty knives can irreparably damage the grinding belt and
polishing wheel. The surfaces can heat with long-term use.
• Only machine clean knives.
• Switch off the belt grinder after 30 minutes at the latest.
NOTE
Belt grinder SM-140
8
25