Machining Workpieces; Grinding Workpieces; Grinding Zones - Dick SM-100 Operating Instructions Manual

Machining workpieces

8
8. Machining workpieces
8.1

Grinding zones

Figure 8.1 – Grinding zones
[1] Grinding with underlay for straight grinding
[2] Grinding on the free belt for convex grinding (also called
Dirty knives can irreparably damage the grinding belt and
polishing wheel. The surfaces can heat with long-term use.
•
•
Belt grinder SM-100
26

Grinding workpieces

1
2
crowned grinding)
Only machine clean knives.
Switch off the belt grinder after 30 minutes at the latest.
NOTE