Table of Contents
Advertisement
The anti-theft alarm is active,
4
the motion sensor is deactiv-
ated.
68
Activation with remote
control
Switching off ignition (
z
Press button 1 on the remote
control twice.
See also the other func-
tions of the remote control
for the central locking system.
Activation takes 30 seconds to
complete.
Turn indicators flash twice.
Confirmation tone sounds
twice.
Anti-theft alarm is active.
44).
To deactivate the motion
sensor (for example if you
are about to transport the
motorcycle on a train and the
swaying movement of the
moving train could trip the
alarm), press button 1 on the
remote control again during the
activation phase.
Turn indicators flash three
times.
Confirmation tone sounds three
times.
Motion sensor is deactivated.
Alarm
An alarm can be triggered by
the motion sensor
an attempt to use an unau-
thorised key to switch on the
ignition
disconnection of the anti-theft
alarm from the motorcycle's
battery (internal battery in the
anti-theft alarm provides power
- acoustic alarm only, the turn
indicators do not flash).
All functions are sustained even if
the internal battery of the anti-
theft alarm system is flat; the
only difference is that an alarm
cannot be triggered if the system
is disconnected from the motor-
cycle's battery.
Advertisement
Chapters
Table of Contents
