Cruise-Control System - BMW K 1600GTL Exclusive Rider's Manual

The current setting is shown at
position 2; each time the button
is pressed one of the possible
riding modes is shown at posi-
tion 3.
Repeatedly press the button
until the reading shows the rid-
ing mode you want.
With the motorcycle at a stand-
still, the mode you select is
activated after a brief delay.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Brake not applied
Throttle twistgrip in fully closed
position
Clutch pulled
Once the new riding mode has
been activated, the selection
display disappears.
The mode selected in this way
is retained with the engine-
characteristic and DTC adapt-
ation settings even after the
ignition has been switched off.

Cruise-control system

Switching on cruise
control
Slide switch 1 to the right.
Button 2 is operational.
Saving road speed
Briefly push button 1 forward.
Cruise control can be set
within a speed range from
30 km/h to 220 km/h.
Telltale light for cruise con-
trol shows.
The motorcycle maintains your
current cruising speed and the
setting is saved.
4
63
z