Table of Contents
Advertisement
decelerate only to the cruising
speed saved in memory, even
though you might have intended
slowing to a lower speed.
Telltale light for cruise con-
trol shows.
Switching off cruise
control
Slide switch 1 to the left.
The system is deactivated.
Button 2 is disabled.
Hill Start Control
Hill Start Control
Operation
Non-application of the
brake by the Hill Start
Control assistant if engine/ignition
is switched off, side stand
extended, a time limit exceeded
(approx. 20 minutes) or in the
event of a fault.
It is essential to apply the brakes
manually to hold the vehicle.
Hill Start Control is purely
a comfort system to facil-
itate holding the machine and
pulling way on uphill gradients
and should not be confused with
a parking brake.
See the section entitled
"Engineering details" for
more information on Hill Start
Control.
Firmly pull and then release
handbrake lever 1.
Telltale light for Hill Start
Control appears on the dis-
play.
Hill Start Control is activated.
Pull handbrake lever 1 again to
switch off Hill Start Control.
Hill Start Control is deactiv-
ated automatically when the
motorcycle pulls away.
The 'General' warning light and
the telltale light show briefly
on the display and both telltale
lights for Hill Start Control go
4
65
z
Advertisement
Chapters
Table of Contents
