Lights - BMW K 1600GTL Exclusive Rider's Manual

manually, as otherwise a safety
4
risk would occur.
The changeover between
56
daytime running light and
low beam headlight including
front side lights can be effected
automatically.
On account of the limited
space available, the beams
that are part of the light symbol
do not show when the volume
z
bar appears on the display.
Settings
Call up the
Vehicle
and select
Day run lights
Select
from the menu and set
Auto. DRL
The symbol for the auto-
matic daytime running light
shows in the display.
If the ambient brightness de-
creases below a certain value,
the low beam headlight is auto-
matically switched on (e. B. in
a tunnel). If a sufficient am-
bient brightness is detected,
the daytime running light is
switched on again. If the day-
time running light is active, the
daytime running light symbol is
displayed in the multifunction
display.

Lights

Side light
The side lights switch on auto-
matically when the ignition is
menu
switched on.
.
Do not switch the ignition
On
to .
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
The side lights place
a strain on the battery.
High-beam headlight and
headlight flasher
Push switch 1 forward to
switch on the high-beam
headlight.
Pull switch 1 back to operate
the headlight flasher.
The high-beam headlight
can also be switched on
when the engine is not running.
Parking lights
Switching on ignition ( 43).