Table of Contents
Advertisement
Note the direction-of-rotation ar-
8
rows on the tyre or the wheel
rim.
122
Roll the front wheel into posi-
tion between the front forks.
z
Raise the front wheel, insert
quick-release axle 3 and
tighten to specified torque.
Quick-release axle in
threaded bush (wheel
carrier)
50 Nm
Tighten right axle clamping
screw 2 to the specified tight-
ening torque.
Clamping screw for
quick-release axle to
wheel carrier
19 Nm
Remove the front-wheel stand.
Insert the ABS sensor into its
bore and install screw 1.
Ease the brake calipers on to
the brake discs.
Install securing screws 3 on
left and right and tighten to
specified tightening torque.
Front brake caliper to
wheel carrier
30 Nm
Advertisement
Chapters
Table of Contents
