System Pin - Swisscom Nyon User Manual

3. Select REGISTER HS
4. PRESS OK TO PUT THE HANDSET IN REGISTRATION MODE
When you are ready to proceed to the handset registration, confirm by
OK to enter the registration mode.
5. CONNECTION - PLEASE PRESS THE CONNECTION BUTTON ON THE ROUTER
OR THE BASE STATION AND WAIT
When using the Internet-Box, press the '+' KEY.
When using Centro Business 2.0 press long the 'DECT' KEY.
Note
In case the base does not use 0000 as a system pin code, the handset
will request the pin.
6. If the registration is successful the handset is assigned a handset name
(e.g. DECT 203,
If the registration is not successful, repeat the procedure.
7. If you have more than one IP line: After successful registration you can
directly select the incoming line(s) the handset is attached to and the
default outgoing line for your handset.
• Deregister a handset
All registered handsets are displayed. The actual handset is highlight-
ed. You can deregister handsets from the base station. The base sta-
tion must be within range.

System PIN

We recommend that you change the system PIN to protect your telephone
against unauthorised access.
Note
• Attention: Please take good note of your new system PIN!
and press OK to confirm.
appears.
INT 1 or HANDSET
34
1).
is displayed.