Ecomode Plus; Registration - Swisscom Nyon User Manual

Ecomode plus

When in standby, the electromagnetic radiation is automatically shut down
between the base station and the handset, when Ecomode plus is set to
"On". The handset does not emit any electromagnetic radiation when it is
not in use.
During a call, the electromagnetic radiation beween handset and base is
dynamically reduced according to the distance from the base station. The
handset's power transmission is regulated; the power transmitted from the
handset is automatically reduced to the lowest level, depending on the dis-
tance to the base station. The closer you are to the base, the lower the
electromagnetic radiation.
Note
• The coverage symbol is lit blue, when the electromagnetic radiation
between the base station and the handset is shut down.
• To turn off Ecomode plus, select
• Ecomode plus also works if multiple handsets are registered (if the
handsets support Ecomode plus).
• Other cordless DECT products in range may interfere with Ecomode
plus.

Registration

You can register additional handsets with the base station. The base sta-
tion must be within range.
Note
If you purchase additional handsets
• you must have a compatible base station available for this handset.
• the batteries must first be fully charged!
• the handsets must be registered with the base station before use!
If your handset is already registered, follow these steps to register it to
another base. If the handset is not registered, please refer to the "Installa-
tion assistant" section of this manual.
1. Press the softkey under MENU. Scroll to
OK to confirm.
2. Scroll to REGISTRATION
SETTINGS/ECOMODE
using and press OK to confirm.
33
PLUS/OFF.
SETTINGS using and press