Appendix C Disposal Of Reader - Motorola FX9500 User Manual

Appendix C Disposal of Reader

Prior to disposing of the FX9500 RFID Reader, the battery must be removed. The battery used in the FX9500
RFID Reader is a Lithium / Manganese Dioxide (Li/MnO2) type. This battery contains no measurable amounts
of mercury, lead, or cadmium.
CAUTION
To remove the battery, perform the following:
Remove the reader from service and disconnect any power, antenna, and communication cables.
1.
Place the reader on a static protected surface.
2.
Turn the reader so the bottom of the reader is facing up as shown in
3.
Bottom of Reader
Figure C-1
Using a Torx screwdriver, remove the (6) Torx screws securing the reader base to the reader enclosure.
4.
The procedure outlined in this appendix requires opening the FX9500 RFID Reader case in
order to remove the battery prior to disposal. Opening the case of the FX9500 RFID Reader
will void the warranty. In addition, opening the case may adversely affect future performance
of the reader.
Never open the case of the FX9500 RFID Reader unless you are going to remove the
battery and dispose of the unit.
All disposal operations must be performed within local guidelines and laws. It is the
responsibility of the reader owner to ensure all local and regional laws and regulations are
followed for proper reader disposal.
Figure C-1.