Expert Configuration - Digital I/O - Motorola FX9500 User Manual

4 - 22 FX9500 RFID Reader User Guide

Expert Configuration - Digital I/O

Some of the antenna parameters available on the reader are as follows:
•
antennas.detected - Antenna ports with antennas connected.
•
antennas.max_set_conducted_power - Maximum conducted power for all antennas.
•
antennas.max_computed_conducted_power - Maximum computed conducted power for all antennas.
•
antennas.mux_sequence - Specify a list of antenna ports.
•
antennas.port_count - Number of antenna ports on this reader.
•
antennas.<n>.conducted_power - Transmit power for antenna port.
•
antennas.<n>.advanced.cable_loss - Cable loss on this port.
•
antennas.<n>.advanced.computed_conducted_power - Computed conducted power on this port.
• This parameter is the only parameter from the above that will be persisted when connecting over the
LLRP interface. All other values may be overwritten based on LLRP interface configurations.
Expert Configuration - Digital I/O Screen
Figure 4-22
Use the Expert Configuration - Digital I/O option to configure the digital inputs
and output behavior. Set the digital input debounce time (in milliseconds), as well
as the input and output pin values.