Fx9500 Antenna Specifications - Motorola FX9500 User Manual

A - 6 FX9500 RFID Reader User Guide

FX9500 Antenna Specifications

Recommended Antenna Specifications
Table A-6
Feature
Frequency (FCC)
Gain
VSWR, maximum
Front to back ratio
Input impedance
Power Handling
USA: This device has been designed to operate with no more than 1 Watt into the antenna with
NOTE
an antenna gain of no more than 6dBil (with a minimum cable loss of 1dB).
Canada: Antenna having a higher gain is strictly prohibited per regulations of Industry Canada,
unless power into the antenna is decreased to compensate for the increased antenna gain. The
required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be
so chosen that the equivalent isotropically radiated power (EIRP) is not more than that
required for successful communication.
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit an RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada's website at www.hc-sc.gc.ca/rpb.
Optional Zebra supplied antennas are for indoor use only.
EU: The maximum Radiated Power (ERP) is limited to 2W.
FCC: 902-928 MHz; EU 865-868 MHz
FCC: 6 dBiL max; EU 6 dBiL max
1.3:1 or less
1 dB or less
50 Ohm (nominal)
10 W
Description