Revision History - Motorola FX9500 User Manual

Revision History

Changes to the original manual are listed below:
Change
-01 Rev A 7/2011
-02 Rev A 10/2011
-03 Rev A 1/2012
-04 Rev A 8/2012
-05 Rev A 7/2013
-07 Rev A 3/2015
Date
Initial release
Add instructions to change password.
Update Set Regulatory Mode.
Correct storage temperature. Remove Connecting to Serial Port and Connecting
to USB Port. Remove User Application Management. Add important note in
chapter 2 and Appendix B regarding connecting the antenna and ensuring that
the reader is Not Transmitting RF Signals. Add notes regarding the following:
Motorola does not support embedded applications/scripts; FX9500 supports only
host based applications. Add GPIO Connections. Remove Chapter
5:Configuring Inputs and Outputs.
Add: EMDK Toolkits in Related Document and Software section; GPIO section
figures; Programming for the FX9500 chapter.
Removed: References to USB and RS-232 interfaces; references to Embedded;
Import Security Keys.
Zebra re-branding
Description
iii