Motorola FX9500 User Manual page 17

As shown in Figure 1-2, the high performance FX9500 RFID Reader supports up to eight Tx/Rx antennas (8x1
monostatic or 4x2 bistatic) and Ethernet interfaces. Discrete digital inputs and outputs are also provided.
FX9500 Power and I/O Connections
Figure 1-2
The eight (8) port FX9500 RFID Reader illustrated above also is available in a four (4) port
NOTE
configuration (see
The FX9500 RFID Reader is equipped with four status indicators located on the top of the enclosure. These LEDs
provide indication for the following:
.
FX9500 RFID Reader Status Indicators
Figure 1-3
FX9500 RFID Reader Indication Definitions
Table 1-1
Number Indication
1 Power
2 Activity
3 User
4 Status
Configurations on page
Color/State
Off Power off
Amber Boot loader executing
Amber-Flashing Linux initializing
Green Unit operational
Off RF off
Green TX active
Green-Flashing Tag detect
Amber Antenna check failed
Amber User defined
Off OK
Amber Firmware update
Green-Flashing GPIO activity
Red Fault
3-ix).
Indication
Getting Started 1 - 3