Setup Antenna/Cables - Motorola FX9500 User Manual

4 - 10 FX9500 RFID Reader User Guide

Setup Antenna/Cables

To change, enter the appropriate values for each antenna parameter and press the Submit button to update the
antenna and cable configuration. Select the next antenna and repeat.
Antenna/Cable Setup Screen
Figure 4-8
Use this option to configure the reader's antenna multiplexer sequence as well as,
conducted power.
To configure an antenna, enter the antenna number in the Mux Sequence field.
The individual antenna Conducted Power fields will be activated in the lower
window. The current values will be displayed. Only those antennas listed in the
Mux Sequence will be shown. Also, you must set Conducted Power to 0 in order
to set or change the Attenuation, Cable Loss, or Gain.