Motorola FX9500 User Manual page 26

3 - 2 FX9500 RFID Reader User Guide
Log into the RFID Reader. Press Login for the login screen.
3.
Login Screen
Figure 3-2
The default login is guest. If you need administrator privileges, login as admin and enter change as the
4.
password.
Press Submit.
5.
Select Basic Configuration, then Setup Antenna/Cables to configure the antennas, gain, and power
6.
settings.
Select Advanced Functions, then Change Operating Mode to verify the RFID Reader is in the proper mode.
7.
Select Basic Configuration, then Set Tag Protocol to verify the RFID Reader is configured for the proper tag
8.
protocol.
Press System Status, then View Tags to view tag data.
9.
View Tag Data Screen
Figure 3-3
If you need to configure your RFID Reader, see
10.
Console to adjust configuration variables and parameters.
Chapter 4, Reader Web Console for information on using Web