Command Link Speedometer - Yamaha VF200 Owner's Manual

The speed & fuel meter unit is available in
round and square types. Check your speed &
fuel meter unit type.
After the main switch is first turned to the "
(on) position, all of the displays come on as a
test. After a few seconds, the unit will change
to normal operation.
For more information, see the operation man-
ual for the meters.
1
1. Set button
2. Mode button
1
3
1. Speedometer
2. Fuel meter
3. Multifunction display
Instruments and indicators
"
1
1. Set button
2. Mode button
2
ZMU05432
1. Speedometer
2. Fuel meter
3. Multifunction display
EMU41041

Command Link speedometer

The speedometer unit shows the boat speed
2
and has functions of fuel meter and system
voltage display. The chosen display is select-
ed using the "
ZMU05433
buttons as described in this section. In addi-
tion, the speedometer can show the desired
unit of measurement such as km/h, mph, or
knots. If the speed sensor is installed, the unit
can also show the trip display. However, even
if the speed sensor is not installed, the trip dis-
play can be shown by connecting an optional
sensor to the unit. In addition, if optional sen-
sors are connected to the unit, water surface
2
ZMU05434
1 2
3
ZMU05435
" (set) and " " (mode)
41