Overheat Alert; Water Separator Alert; Engine Trouble Alert - Yamaha VF200 Owner's Manual

EMU36221

Overheat alert

If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for clog-
ging.
ECM01592
NOTICE
Do not continue to run the engine if the
G
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
G
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
Instruments and indicators
EMU36150

Water separator alert

This indicator will blink if water has accumulat-
ed in the water separator (fuel filter) while
cruising. In such an event, stop the engine im-
mediately and see page 85 of this manual to
drain the water from the fuel filter. Get back to
the port soon and consult a Yamaha dealer
immediately.
ZMU05421
ZMU05422
ECM00910
NOTICE
Gasoline mixed with water could cause
damage to the engine.
EMU36160

Engine trouble alert

This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port soon
and consult a Yamaha dealer immediately.
ZMU05423
ZMU05424
39