Command Link Multifunction Speedometer; Command Link Multifunction; Fuel Management Meter - Yamaha VZ175 Owner's Manual

1. Speedometer
2. Fuel meter
3. Multifunction display
EMU41042

Command Link Multifunction

Speedometer
The speedometer unit shows the boat speed
and has functions of fuel meter and system
voltage display. The chosen display is se-
lected using the "
(mode) buttons as described in this section.
In addition, the speedometer can show the
desired unit of measurement such as km/h,
mph, or knots. If the speed sensor is in-
stalled, the unit can also show the trip dis-
play. However, even if the speed sensor is
not installed, the trip display can be shown
by connecting an optional sensor to the unit.
In addition, if optional sensors are connected
to the unit, water surface temperature dis-
play, depth display, and clock will also be
available. For the optional sensors, consult
your Yamaha dealer.
After the main switch is first turned to the
" " (on) position, all of the displays come on
as a test. After a few seconds, the unit will
change to normal operation.
For more information, see the operation
manual for the meters.
1 2
3
ZMU05435
" (set) and "
Instruments and indicators
1
1. Set button
2. Mode button
1
3
"
1. Speedometer
2. Fuel meter
3. Multifunction display
EMU41022
Command Link Multifunction

Fuel Management Meter

The fuel management meter has the func-
tions of fuel flow meter, total consumption
display, fuel economy display, and remaining
fuel display. The chosen display is selected
using the "
tons as described in this section.
After the main switch is first turned to the
" " (on) position, all of the displays come on
as a test. After a few seconds, the unit will
change to normal operation.
For more information, see the operation
" (set) and " " (mode) but-
2
ZMU05436
2
ZMU05437
37