Instruments And Indicators; Command Link Multifunction Meters; Command Link Multifunction Tachometers - Yamaha F250B Owner's Manual

Instruments and indicators

EMU31642
Command link multifunction
meters
Command link multifunction meters have 6
kinds of meter units; tachometer unit (square
or round types), speedometer unit (square
type), speed & fuel meter unit (square or
round types), and fuel management meter
(square type). The indicator system is slightly
different between the round and square types.
Check the model and type of your unit careful-
ly. This manual describes mainly the alert in-
dicators. For more details on setting meters or
changing indicator systems, see the attached
operation manual.
EMU36103
Command link multifunction ta-
chometers
The tachometer shows the engine revolutions
per minute. It has functions of trim meter, ad-
justing trolling speed, cooling water/engine
temperature display, battery voltage display,
total hour/trip hour display, oil pressure dis-
play, water detection alert, engine trouble
alert, and periodic maintenance notification. If
the cooling water pressure sensor is installed,
the unit can also show the cooling water pres-
sure display. However, even if the cooling wa-
ter pressure sensor is not installed, the
cooling water pressure display can be shown
by connecting an optional sensor to the unit.
For the optional sensor, consult your Yamaha
dealer. The tachometer unit is available in
round or square types. Check your tachome-
ter unit type.
42
1
1. Set button
2. Mode button
5
4
7
6
8
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
1
1. Set button
2. Mode button
2
ZMU05415
1
2
3
ZMU05416
2
ZMU05417