Outboard Motor; Flushing Device; Installing Top Cowling - Yamaha VF200 Owner's Manual

EMU40411

Outboard motor

Check that the outboard motor is mounted
G
properly and check the outboard motor
mounting bolts for looseness.
Check the propeller for damage.
G
Check for engine oil leaks.
G
EMU36491

Flushing device

Check that the flushing device's garden hose
connector is securely screwed on to the fitting
on the bottom cowling. NOTICE: If the gar-
den hose connector is not properly con-
nected, cooling water can leak out and the
engine can overheat during operation.
[ECM01801]
3 2 1
1. Flushing device
2. Garden hose connector
3. Fitting
EMU40751

Installing top cowling

1. Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
1
2
1. Rubber seal
2. Bottom cowling
2. Check that the rubber seal is seated all
the way around the bottom cowling.
3. Check that all of the cowling lock levers
are pulled outward.
4. Align the 3 protrusions on the top cowling
with the corresponding holders on the
bottom cowling, and then place the top
cowling on the bottom cowling.
1
ZMU06919
4
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
Operation
ZMU06978
2
3
ZMU07015
51