Side-Discharging The Clippings; Installing The Side Discharge Chute; Removing The Side Discharge Chute - Lawn-Boy 10666C Operator's Manual

Figure 32
3. Insert the mulch plug (Figure 33.
Figure 33

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: The mower has a safety switch that
prevents you from starting the mower unless you
first install the mulch plug securely on the mower
(refer to Mulching the Clippings).

Installing the Side Discharge Chute

1. Unlock the side discharge door (Figure 34).
2. Lift open the side discharge door (Figure 35).
3. Install the side discharge chute and close the door
onto the chute (Figure 36).

Removing the Side Discharge Chute

To remove the side discharge chute, reverse the steps
above.
Important: Lock the side discharge door after you
close it (Figure 37).
14
Figure 34
Figure 35
Figure 36