Side-Discharging The Clippings; Installing The Side Discharge Chute - Lawn-Boy Insight 10780 Operator's Manual

Figure 25
Removing the Grass Bag
1. Route the starter rope around the lower rope guide
(Figure 26).
Figure 26
2. Lift the grass bag handle out from the grooves at the
top of the mower and remove the bag from the mower
(Figure 27).
Figure 27
3. Insert the mulch plug (Figure 28.
Figure 28

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: The mower has a safety switch that
prevents you from starting the mower unless you first
install the mulch plug securely on the mower (Figure
29).
Figure 29
1. Top of mulch plug lever in switch channel

Installing the Side Discharge Chute

1. Unlock the side discharge door (Figure 30).
Figure 30
2. Lift open the side discharge door (Figure 31).
Figure 31
3. Install the side discharge chute and close the door onto
the chute (Figure 32).
10