Removing The Grass Bag; Side-Discharging The Clippings; Installing The Side Discharge Chute - Lawn-Boy Insight 10686 Operator's Manual

Removing the Grass Bag

1. Route the starter rope around the lower rope
guide.
2. Lift the grass bag handle out from the grooves at
the top of the mower and remove the bag from the
mower.
3. Insert the mulch
plug and rotate the latch
rod until it locks into
place at both the top
and the bottom (A).
12
Side Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag on
page 12) before side discharging the clippings.
Important: Ensure that
the mulch plug (A) is
locked in place at both
the top and the bottom
before you side
discharge the clippings.
m-7958

Installing the Side Discharge Chute

1. Unlock the
side discharge
door.
2. Lift open the side
discharge door.
m-7959
3. Install the side discharge chute and close the
door onto the chute.
A
m-7934
3352-945 Rev B
A
m-7967
m-7195
m-5584
m-7935