Lawn-Boy Silver Series Operator's Manual
  1. Manuals
  2. Brands
  3. Lawn-Boy Manuals
  4. Lawn Mower
  5. Silver Series
  6. Operator's manual

Lawn-Boy Silver Series Operator's Manual

Walk power lawn mower
Hide thumbs Also See for Silver Series:
Table of Contents

Advertisement

Quick Links

Silver Series
Walk Power Lawn Mower
10360—220000001 and Up
10361—220000001 and Up
Operator's Manual
Para obtener una versión gratis de este manual en español, escriba a la dirección
indicada más abajo. Asegúrese de indicar el modelo y el número de serie de su producto.
Pour obtenir gratuitement une version en français de ce manuel, écrivez à l'adresse
ci–dessous. N'oubliez pas d'indiquer les numéros de modèle et de série de votre produit.
Lawn-Boy Inc., Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420-1196.
Form No. 3327-602
Domestic English (EN)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Silver Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lawn-Boy Silver Series

Summary of Contents for Lawn-Boy Silver Series

  • Page 1 Pour obtenir gratuitement une version en français de ce manuel, écrivez à l’adresse ci–dessous. N’oubliez pas d’indiquer les numéros de modèle et de série de votre produit. Lawn-Boy Inc., Attn: Parts Dept., 8111 Lyndale Ave S, Bloomington, MN 55420-1196. Domestic English (EN)

  • Page 2: Table Of Contents

    ........Whenever you need service, genuine Lawn-Boy parts, or Unfolding the Handle .

  • Page 3: Safety

    Be alert and turn the lawn mower off if children enter Lawn-Boy designed and tested this lawn mower to offer the area. reasonably safe service; however, failure to comply with...
  • Page 4 Before using, always visually inspect the blades, blade – before clearing blockages or unclogging the chute; bolts, and cutter assembly for wear or damage. – before checking, cleaning, or working on the lawn Replace worn or damaged blades and bolts in sets to mower;...

  • Page 5: Safety And Instruction Decals

    Keep the lawn mower free of grass, leaves, or other debris buildup. Clean up any oil or fuel that spills. To ensure the best performance and safety, purchase only genuine Lawn-Boy replacement parts and Stop and inspect the lawn mower if you strike an accessories.

  • Page 6: Assembly

    Changing the Handle Height Assembly The handle has two height settings: high and low (Fig. 3). Note: Determine the left and right sides of the machine Choose a handle height setting that is most comfortable from the normal operating position. for you.

  • Page 7: Installing The Fuse

    3. Install the battery box cover. Before Starting Filling the Crankcase with Oil m-5146 Your Lawn-Boy lawn mower comes without oil in the Figure 4 crankcase. However, your lawn mower comes with a 1. Battery box 2. Battery box cover 20 oz.

  • Page 8: Filling The Fuel Tank With Gasoline

    7. If the oil level reading is below the Add mark on the Danger dipstick, slowly pour only enough oil into the filler hole to raise the oil level to the Full mark on the dipstick. When fueling, under certain circumstances, a static charge can develop, igniting the gasoline.

  • Page 9: Operation

    Important Do not use fuel additives other than a fuel stabilizer/conditioner . Do not use fuel stabilizers with an alcohol base such as ethanol, methanol, or isopropanol. 3. Remove the cap from the tank (Fig. 9). m-3714 4. Fill the fuel tank with unleaded gasoline to within 1/4 Figure 11 to 1/2 in.

  • Page 10: Stopping The Engine

    Stopping the Engine For example, if you approach an object (such as a tree or a bush) from which you want to pull back the lawn mower, release the self-propel drive bail when the lawn mower is Release the blade control bail (Fig. 13). Both the engine about six inches (15 cm) away from the object.

  • Page 11: Operating Tips

    Overlap the cutting swaths instead of cutting a full swath with each pass. Replace the blade when necessary with an original Lawn-Boy replacement blade. Set the cutting height on the front wheels one notch lower than the rear wheels. Mow only dry grass or leaves. Wet grass and leaves tend to clump on the yard and may cause the lawn mower to plug or the engine to stall.

  • Page 12: Maintenance

    Maintenance Note: Determine the left and right sides of the machine from the normal operating position. Recommended Maintenance Schedule Maintenance Service Maintenance Procedure Interval Check the engine oil level. Each Use Remove grass clippings and dirt from under the housing. Check the blade and the engine mounting fasteners.

  • Page 13: Checking The Engine Oil

    Checking the Engine Oil Warning Before you use the lawn mower, make sure that the oil level is between the Add and the Full marks as shown on Tipping the lawn mower may cause the fuel to the dipstick (Fig. 7). If the oil level is below the Add leak from the carburetor or the fuel tank.

  • Page 14: Changing The Engine Oil

    However, of the slot in the flange (Fig. 20). because the plug is not easily accessible, Lawn-Boy does not recommend draining the oil from below the deck. 5. Push the cover firmly against the flange and turn it clockwise as far as it will go.

  • Page 15: Cleaning Under The Belt Cover

    Cleaning under the Belt Cover Inspecting the Blade Carefully examine the blade for sharpness and wear, Under certain conditions, clippings can collect under the especially where the flat and the curved parts meet belt drive cover and in the pulley groove. This can cause (Fig.
  • Page 16 Removing the Blade Balancing the Blade 1. Remove the blade nut (Fig. 23). 1. Check the balance of the blade by placing the center hole of the blade over a nail or a screwdriver shank clamped horizontally in a vise (Fig. 26). m-2909 1007 Figure 23...

  • Page 17: Adjusting The Self-Propel Drive Cable

    Adjusting the Self-propel Drive Cable Whenever you change the handle height, install a new self-propel drive cable, or if the traction drive belt slips, adjust the self-propel drive cable. 1018 Figure 29 1. Loosen the nut on the cable support (Fig. 28). 1.

  • Page 18: Changing The Fuse

    6. Charge the battery for the specified time. 7. Unplug the battery charger. Important Use only the Lawn-Boy charger; other chargers could damage the battery. Always use the charger indoors and charge the battery at room temperature (70 F or 22 C) whenever possible.

  • Page 19: Storage

    General Information Storage 1. Clean the lawn mower housing. Refer to Cleaning the To prepare the lawn mower for off-season storage, Lawn Mower Housing on page 13. perform the recommended maintenance procedures. 2. Clean any dirt and chaff from the cylinder, cylinder Refer to Maintenance on page 12.

  • Page 20: Removing From Storage

    7. Fill the fuel tank (Fig. 9) with fresh, clean gasoline. 8. Check the engine oil level. 9. Connect the wire to the spark plug (Fig. 8). 10. Charge the battery (Electric Start Model only). Refer to Charging the Battery on page 18. 1039 Figure 33 Accessories...
  • Page 21 Note: The baffle must go behind the front deck baffle and between the blade and toe guard to prevent contact with the blade (Fig. 39). 1073 Figure 36 1. Chute baffle 3. Deck baffle 2. Toe guard Note: The chute baffle must go behind the front deck baffle and between the blade and toe guard to prevent contact with the blade.

  • Page 22: Installing The Cover Plate

    Note: Under normal use, bag materials are subject to deterioration and wear. Check the grass bag often and replace the when necessary with a genuine Lawn-Boy replacement bag. A weakened or inferior bag may let objects pass through, causing injury.

  • Page 23: Installing The Mulch Plate

    Installing the Mulch Plate Note: Use only a genuine Lawn-Boy replacement cutting blade. Other blades may strike the mulch plate when you start and run the engine. To convert from side discharging to mulching, remove the cover plate and install the mulch plate.

  • Page 24: Troubleshooting

    Troubleshooting Lawn-Boy designed and built your lawn mower for trouble-free operation. Check the following components and items carefully, and refer to Maintenance on page 12 for more information. If a problem continues, contact an Authorized Service Dealer. Problem Possible Causes...
  • Page 25 Problem Possible Causes Corrective Action Lawn mower or engine vibrates 1. The blade is bent or is out of 1. Balance the blade. If the blade excessively balance. is bent, replace it. 2. The blade bolt is loose. 2. Tighten the blade bolt. 3.

  • Page 28: The Lawn-Boy No-Worry Warranty

    Distributor (Dealer) to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or have difficulty obtaining guarantee information, contact the Lawn-Boy importer. If all other remedies fail, you may contact us at Lawn-Boy Warranty Company.

This manual is also suitable for:

1036010361

Table of Contents