Installing The Side Discharge Chute; Removing The Side Discharge Chute; Side-Discharging The Clippings - Lawn-Boy 10797 Operator's Manual

Figure 34
2. Lift the grass bag handle out from the grooves at the
top of the mower and remove the bag from the mower
(Figure 35).
Figure 35
3. Insert the mulch plug (Figure 18).
Figure 36

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag) before
side-discharging the clippings.
Important: The mower has a safety switch that
prevents you from starting the mower unless you first
install the mulch plug securely on the mower (refer to
Mulching the Clippings).

Installing the Side Discharge Chute

1. Unlock the side discharge door (Figure 37).
Figure 37
2. Lift open the side discharge door (Figure 38).
Figure 38
3. Install the side discharge chute and close the door onto
the chute (Figure 39).
Figure 39

Removing the Side Discharge Chute

To remove the side discharge chute, reverse the steps above.
Important: Lock the side discharge door after you
close it (Figure 40).
Figure 40
12