Removing The Grass Bag; Side-Discharging The Clippings; Installing The Side Discharge Chute - Lawn-Boy Insight 10684 Operator's Manual

Removing the Grass Bag

1. Route the starter rope around the lower rope
guide.
2. Lift the grass bag handle out from the grooves at
the top of the mower and remove the bag from the
mower.
3. Insert the
mulch plug and
rotate the latch rod
until it locks into
place at both the
top and the
bottom (A).
m-7934
10
Side Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag on
page 10) before side discharging the clippings.
Important: Ensure that
the mulch plug (A) is in
place before you side
discharge the clippings.
m-7932

Installing the Side Discharge Chute

1. Unlock the
side discharge
door.
2. Lift open the side
discharge door.
m-7933
3. Install the side discharge chute and close the
door onto the chute.
A
3352-935 Rev B
A
m-7928
m-7195
m-5584
m-7935