Installing The Grass Bag; Side-Discharging The Clippings; Removing The Grass Bag - Lawn-Boy Insight 10697 Operator's Manual

Installing the Grass Bag

1. Rotate the latch rod
to the right and remove
the mulch plug.
2. Route the starter rope around the lower rope
guide.
Note: The lower rope guide releases the starter
rope when you pull the recoil start handle.
3. Insert the grass bag handle into the grooves at
the top of the mower.

Removing the Grass Bag

1. Route the starter rope around the lower rope
guide.
10
2. Lift the grass bag handle out from the grooves at
the top of the mower and remove the bag from the
mower.
m-7969a
3. Insert the mulch
plug and rotate the latch
rod until it locks into
place at both the top
and the bottom (A).
m-7980
Side Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the bag is on the mower, remove it and insert the
mulch plug (refer to Removing the Grass Bag on
page 10) before side discharging the clippings.
m-7981
Important: Ensure that
the mulch plug (A) is
locked in place at both
the top and the bottom
before you side
discharge the clippings.
m-7958a
3352-964 Rev B
m-7959a
A
m-7934
A
m-7967