Honda ARX1200T3DXT3 Owner's Manual page 90

GPS Mode
12.To enter the displayed tenths of a second
in the system, tap (do not hold) the WP
SET button until LON appears above the
WP mark. The compass direction indicator
will flash Eastern Longitude (11) or
Western Longitude (12). (To switch to the
other hemisphere, press either the plus or
minus button.)
(11) Eastarn Longitude
(12) Western Longitude
13.To enter the longitude coordinates, follow
the same procedure used in steps 6-11.
82
GPScape System
(11)
(12)
To Correct Input:
Push the mode select button (13). This
reverses the sequence so you can back up and
make a correction.
Once the 1/10 second longitude entry is
completed, you can no longer back up in the
sequence to make a correction.
To Change the Coordinates for an Exisiting
Waypoint Number:
Follow steps 1-4 under Advance Waypoint
Selection (page 79) and "overwrite" your
previous waypoint.
(13)