Features - Honda ARX1200T3DXT3 Owner's Manual

To Deactivate the Lock System
1. Insert the lock clip in the engine stop
button/switch to turn on the display.
2. Follow steps 3-6 under To Create an ID
Number (page 40).
If the number you entered is correct, the
beeper will sound twice, and the engine may
be started. If you enter the wrong number,
you are allowed two more attempts.
After three failures to enter the correct
number, the display will turn off.
In order to try again, remove and insert the
lock clip.
If you forget the ID number and have not
recorded it elsewhere, contact your Honda
PWC dealer.
Controls & Features
(ARX1200T3DX)
Instruments & Controls
43