8. To enter the displayed value into the
system, tap (do not hold) the WP SET
button. The next level in the entry
sequence will begin flashing.
9. To select and enter the minutes (8) – follow
the same procedure used in steps 7-8.
(8) minutes
10.To select and enther the seconds (9) –
follow the same procedure used in steps
7-8.
11.To select the tenths of a second (10):
• To increase, tap the plus button.
• To decrease, tap the minus button.
(8)
(9) seconds
GPS Mode
(10) tenths of a second
(cont'd)
GPScape System
(9)
(10)
81