Digital Clock (ARX1200T3DX)
Shows hour and minute. To adjust the time,
proceed as follows:
1. Insert the lock clip in the engine stop
button/switch to turn on the display. If
necessary, enter the ID number after this
operation
(page
42).
2. Switch the multi-function meter (1) to the
digital clock mode by pushing the MODE
button (2).
3. Press and hold the WP SET button (3) for
at least 2 seconds. The clock will be set in
the adjust mode with the hour display
flashing.
Multi-function Display
(1)
(1) multi-function meter
(2) MODE button
(3) WP SET button
Instruments & Controls
(3)
(2)
(cont'd)
35